Evaporator housing drain, removing and installing: Removing
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove glove compartment, lower "A" -pillar trim and mat on passengers side →
- 68 - INTERIOR EQUIPMENT
- 68 - INTERIOR EQUIPMENT for BODY INTERIOR - CABRIOLET
- Carefully fold back floor covering.
- Loosen clip - A -.
- Pull evaporator hose - B - with evaporator valve - C - out of floor panel.
- Remove evaporator valve - C -.