Evaporator Vent Temperature Sensor G263, removing and installing

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove glove compartment →
- 68 - INTERIOR EQUIPMENT
- 68 - INTERIOR EQUIPMENT for BODY INTERIOR - CABRIOLET
.

Fig 1: Evaporator Vent Temperature Sensor G263, Removing/Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect connector - A -.
Turn sensor - B - through 90° and pull it out of air conditioner.

NOTE:

The evaporator may ice up if the Evaporator Vent Temperature Sensor G263 is not properly installed in the air conditioner air flow.