Air guide connection for glove compartment cooling, removing and installing

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Hole, Air Guide, Plug & Vent

GW00021319

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

The air conditioner is provided with a hole - A - for connecting an air guide - B - to the glove compartment. This air guide is used to route cooled air into the glove compartment.
On vehicles without glove compartment cooling, the hole - A - is sealed with a plug - C -.

Remove vent - D - (screwed to air guide - B -).
Remove glove compartment →
- 68 - INTERIOR EQUIPMENT
- 68 - INTERIOR EQUIPMENT for BODY INTERIOR - CABRIOLET
.
Give the air guide - B - roughly a quarter anti-clockwise turn and remove it from the air conditioner.