Adapter cable, modifying to activate positioning motors
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Make connection to contacts "5" and "6" of connector - A - (part number 6Q0 972 706) using wire with a cross section of 0.25 mm 2 in each case.
- Connect other end of each wire to a commercially available banana plug - B -.