Guide rail of variable convertible top compartment, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove variable convertible top compartment → Variable convertible top compartment, removing and installing .

Fig 1: Identifying Carpet, Bolts, Convertible Top Compartment Center Section & Right Side Section

GW00021214

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull carpet - 1 - back (convertible top compartment lining) on side to be changed until both bolts - 2 - are accessible.

Bond carpet with D 001 200.

Remove bolts - 2 - (2x).

Tightening torque 4 Nm

Detach convertible top compartment center section - 3 - from side section - 4 - on right.

Fig 2: Identifying Side Sections & Bolts

GW00021215

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull side sections - 1 - and - 2 - apart.
Remove bolts - 3 - (4x) from inner lid.

Tightening torque 2 Nm

Detach inner lid - 1 -.

Fig 3: Removing Bolts

GW00021217

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - 1 - (4x) on both sides.

Tightening torque 2 Nm

Fig 4: Identifying Sections, Guide Rails, Holder & Toothed Segment

GW00021218

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull sections - 1 - and - 4 - apart upward.
Pry guide rail - 3 - out of catch of section - 1 -.
Separate sections - 1 - and - 4 -.

Fig 5: Removing Bolts & Guide Rail

GW00021223

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - 2 - on left and right.

Tightening torque 1 Nm

Push guide rail - 1 - downward and out of locking tabs.
Remove guide rail - 1 -.

Installing

Installation is in reverse order of removal.