Sill panel trim, removing and installing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Removing
- Unclip side trim - 1 - in bottom area.
- Unclip sill panel trim - 2 - at clips - 3 - (3x).
- Remove sill panel trim - 2 -.
- Installing
- After installation ensure that seal is pulled correctly over sill panel trim - 2 -.
- Install sill panel trim - 2 - in reverse order of removal.