Interior light/reading light, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Fig 1: Identifying Pry Lever 80-200

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pry bar 80-200
Removing

Fig 2: Using Pry Bar 80-200 To Carefully Pry Out Interior Light At Rear Edge

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Using Pry bar 80-200 , carefully pry out interior light at rear edge. Watch for the two retaining tabs - arrows -.
Disconnect connectors.

Installing

Installation is in reverse order of removal.