Removing upper steering column switch trim
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Drivers airbag unit and steering wheel removed
- Pull steering column out and downward as far as possible.
- Remove bolts - 1 - (2x). Tightening torque 3 Nm
- Remove Torx bolts - 3 - with screwdriver T8 T40056. Tightening torque 0.6 Nm
- Unclip surround from instrument panel downward - arrow -.
- Remove upper steering column switch trim - 2 -.