Mirror adjustment switch, removing and installing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Figure shows armrest without cover.
- Remove door trim → Door trim, assembly overview .
- Remove armrest → Armrest, removing and installing .
- Using a screwdriver, pry out mirror adjustment switch - 1 -.
- Disconnect connector at mirror adjustment switch - 2 -.
- Installing
- Installation is in reverse order of removal.