Side window, installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with molded side window

Place window onto lower D-pillar and press into window opening.
Side window molding must engage behind roof trim molding → Side window (Sedan), removing and installing
Secure window in opening using adhesive tape.
Observe curing time.

Vehicles with gloss package

Press roof trim molding into retaining clips at D-pillar.

Fig 1: Removing/Installing Roof Trim Molding

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press trim - 1 - into retaining clips - 2 - at D-pillar and lower side panel.
Position window at lower side panel and press into opening.
Secure window in opening using adhesive tape.

Fig 2: Removing/Installing Roof Trim Molding And Slide Trim

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Position upper B-pillar trim at roof trim molding and slide trim - 1 - into side retaining clips.
Observe curing time.