Side window, installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Adhere spacer onto side window.
Apply double sided adhesive tape D 004 400 on window gasket, rear.

Vehicles with gloss package

Fig 1: Identifying Lower Trim Molding & Retaining Springs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Install lower trim molding - 1 - into retaining clips - 2 -.

Fig 2: Pressing Side Window Into Window Opening Using V.A.G 1344 Double Suction Cups

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press side window into window opening using V.A.G 1344 double suction cups and align it according to window opening.
Secure window in opening using adhesive tape.
Observe curing time.

Fig 3: Pressing It Into Retaining Clips At C-Pillar

Courtesy of VOLKSWAGEN UNITED STATES, INC.

On vehicles with trim attached, press it into retaining clips at C-pillar - arrows -.