Crossmember, removing from cover and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Bumper removed.
Remove signal horn - 4 -.

Fig 1: Crossmember, removing from cover and installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).
Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.
Remove bolts - 1 - (qty. 5).
Pry off retaining clips - 2 - (qty. 3).

Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.