Panel gap dimensions

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Adjustment Gauge 3371

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Adjusting gauge 3371

Fig 2: Panel Gap Dimensions

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Dimension - E - = 3.5 mm ± 0.5 mm
Dimension - F - = 4.5 mm ± 0.5 mm
Flush adjustment of front door to fender must be in the range of 0 mm to 1 mm recess.
Flush adjustment of front door to rear door must be in the range of 0 mm to 1 mm projection.