Adjusting buffer stops
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- Open lid.
- Remove rubber cap.
- Screw in buffer stops until they reach stop.
- Unscrew stop again in steps.
- Press rubber cap on.
- When adjusted correctly and with lid closed, buffer stops must make contact lightly on luggage compartment edge.