Insulation mat to rear lid, adhering
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
On a new rear lid, insulation mats must be adhered to surfaces depicted in the illustration after painting:
- Cut the insulation mats from self-adhering insulation Part No. 323 863 950 to the following dimensions:
1 - Insulation mat 100 x 150 mm (2x)
2 - Insulation mat 30 x 100 mm (2x)