Removing and installing catch hook

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing And Installing Catch Hook (Up To Vehicle Identification Number (VIN) 400 000)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Up to Vehicle Identification Number (VIN) 400 000

To remove, unscrew cap nuts - 2 - and remove catch hook - 1 -.
When installing, tighten cap nuts to 11 Nm.

Fig 2: Removing And Installing Catch Hook (As Of Vehicle Identification Number (VIN) 400 001)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

As of Vehicle Identification Number (VIN) 400 001

To remove, unscrew cap nuts - 2 - and remove catch hook - 1 - from hood - 3 -.
When installing, tighten cap nuts to 11 Nm.