Radiator grille, removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- To remove, disengage locking mechanisms - arrows -.
- Swivel out radiator grille at top, then pull off downward.
NOTE:
- To ease installation, coat PU seal with lubricant.
- To install, insert centered at bottom (note middle centering) and swivel in - direction of arrow -.
- Dimension - a - = 1.5 ± 0.5 mm
- Dimension - b - =0.7 ± 0.5 mm
- When installing, make sure radiator grille engage completely (audibly).