Measurement preparations
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wheel alignment computer V.A.G 1813
- Brake pedal actuator V.A.G 1869/2
- Bolt for steering centering VAS 6224
- Spacer unit V.A.G 1925
Rim run-out compensation
The lateral run-out of the wheel must be compensated for. Otherwise, measurement will result in false readings.
A correct toe-in adjustment will not be possible without performing lateral run-out compensation!
- Carry out wheel run-out compensation. For this, observe notes by manufacturer of wheel alignment equipment.
- Install brake pedal loading device V.A.G 1869/2.