Changing tires: Notes
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Nickel-plated valve insert must be replaced with every tire change.
Metal valve and wheel electronics can be reused
- Let air out of tire by removing nickel-plated valve insert.
- Tires, dismounting Dismounting tire
- Perform a visual inspection for loose or damaged parts. If there are loose threaded connections, replace entire valve unit.
Damaged wheel electronics must be replaced.
- Tires, mounting Mounting tire
- Install new nickel-plated valve insert.
- Fill tires, reinstall plastic cap.
- Balance tires.