Dynamic Ride Control (DRC II), emptying and filling: Notes
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Charging device V.A.S 6209
- Vehicle connection adapter V.A.S 6209/1
Only approved oil should be used for filling or topping off.
Filling must only be done at room temperature (approx. 20°Celsius).
Vehicle must never be placed on wheels with closed, filled system and locked central valves. This inevitably leads to leaks and system malfunction.
Equipment valves are open when locking levers are longitudinal to direction of flow.
Workshop equipment needed
1 - Vehicle connection adapter with ventilation valve V.A.S 6209/1
2 - Connecting hose
3 - Venturi with exhaust hose
4 - Valve
5 - Pressure reducer
6 - Pressure gauge with valves and filler hose
7 - Intake hose
8 - Used oil container
Identification: red dot
9 - New oil container
Identification: green dot