Fill new oil container
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Protective eye wear must be worn for all procedures!
- Connect suction hose - 7 - to new oil container - 9 -.
- Immerse free end of hose - 7 - in oil in storage container.
- Close valve - 4 -.
- Connect valve - 4 - to new oil container.
- Connect venturi - 3 - to valve - 4 -.
- Connect compressed air hose to venturi - 3 -.
- Slowly open valve - 4 - and draw oil out of storage container into new oil container.
Maximum quantity 1.5 liters.
NOTE:
- Oil can foam up when it is drawn out.
- Stop suction process so that foam can settle.