Strut, servicing: Notes

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Torque Wrench V.A.G. 1331

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench V.A.G 1331

Fig 2: Special Wrench 3017 A

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special wrench 3017 A

Fig 3: Exploded View Of Strut

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Hex nut, self-locking, 25 Nm

Always replace
Loosening and tightening Loosening and tightening bolted connection for strut mount

2 - Strut mounting

3 - Buffer stop

4 - Protective sleeve

5 - Strut

Removing and installing → Strut
Note different vehicle versions, see vehicle data plate. Clarification of Production Control numbers (PR No.)
Faulty struts must be vented and emptied before disposal → Strut, checking
Check removed strut → Strut, checking