Bonded rubber bushing stop wedges, removing and installing

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove subframe supports.
Pull stop wedges downward out of bonded rubber bushings.

Installing

Fig 1: Pushing Stop Wedges Positioned In Bonded Rubber Bushing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Push stop wedges - 1 - positioned in bonded rubber bushing as shown in illustration in to stop.

Illustration shows subframe from below.

Install subframe supports.