Peened triple roller joint AAR 2600 i or 3300 i, disassembling and assembling: Tools

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Peened Triple Roller Joint AAR 2600 i Or 3300 i, Disassembling And Assembling (1 Of 2)

GW00002764

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Thrust plate VW 401
Thrust plate VW 402
Punch VW 408 A
Punch VW 411

Sleeve VW 416 B
Thrust pad VW 447 H

Fig 2: Identifying Special Tools - Peened Triple Roller Joint AAR 2600 i Or 3300 i, Disassembling And Assembling (2 Of 2)

GW00002787

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Hose clamp pliers V.A.G 1275
Torque wrench V.A.G 1331
Torque wrench V.A.G 1332
CV joint boot clamp tool V.A.G 1682

Assembly tool T10065

Fig 3: Slide Hammer-Multi-Purpose Tool Set VW 771

GW00001531

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Slide hammer - complete set VW 771

Fig 4: Assembly Device T40018 For Triple Roller Joint AAR 3300 i

GW00019847

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly device T40018 for triple roller joint AAR 3300 i
or Assembly device T40084 for triple roller joint AAR 2600 i