Longmember thread, servicing
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
It is possible to service the threads of weld nuts in longitudinal member depending on certain conditions.
- Servicing work may only be performed once per thread.
- If servicing is necessary after this, the nuts must be replaced.
CAUTION:
When drilling, it is essential that eye protection be worn!
- Have thread repair checked by the responsible foreman or next person in charge.
- Thread insert must be same length as thread in body.
- Correct any damage to the underbody sealant layer.