Front axle rotor, checking or removing and installing
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove wheel.
- Remove speed sensor from wheel bearing housing.
- Check rotor for contamination and damage.
NOTE:
- If rotor is damaged or dirty, remove drive axle. If damaged, replace outer CV joint together with rotor.
- The outer CV joint is supplied as a replacement part with the rotor. → 40 - FRONT SUSPENSION