Rear Final Drive
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Allocate bolts and other components according to the Final Drive code via .
- When replacing rear final drive, check and if necessary, correct oil level in final drive → Axle oil in rear final drive, checking .
- Capacities and specification - Audi A4 2002 >, Cabriolet 2003 > → Code letters, aggregate allocation, ratios, capacities, Audi A4 2002 >, Cabriolet 2003 > , Audi A6 2005 > →
- Clean contact surfaces when repairing mounting brackets and waxed components. Contact surfaces must be completely free of oil and grease.
- Thoroughly clean all connections and surrounding area before disconnecting.