Determining thickness of shim "S1*"
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The preliminary adjustment shim "S1*" will be replaced with the final shim "S1" after determining the backlash.
- The total shim thickness "Stotal" remains the same.
| Formula: | ||
| "S1*" | = | "Stotal" - "S2*" |
| Example: | ||
| Total shim thickness "Stotal" for shims "S1" + "S2" |
1.80 mm | |
| - | Inserted shim(s) "S2*" | 1.00 mm |
| = | Thickness of shim "S1*" | 0.80 mm |
- Define shim(s) as precisely as possible based on the table. Refer to The following shims are available for "S1" .