Input shaft, removing and installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Rules of cleanliness for working on automatic transmissions → Rules for cleanliness when working on transmission .
General repair notes → Repair instructions .
Transmission removed and secured vertically to assembly stand Suspending transmission vertically .

The corresponding description for removal and installation of the input shaft can be found in → 38 - AUTOMATIC TRANSMISSION - GEARS, HYDRAULIC CONTROLS .