Securing engine/transmission (transmission flange pattern)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine/Transmission Mountings (Automatic/Manual Transmission)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Vehicles with 1.8 L turbo engine:

Item	Bolt	Nm
1	M10x60	45 * See note
2, 3, 4, 6, 11	M12x67	65 * See note
5	M12x100	65 * See note
7	M10x50	45 * See note
8 10	M10x45	45 * See note
A	Alignment sleeves for centering

*Replace bolts.

Fig 2: Identifying Engine/Transmission Mountings (Automatic/Manual Transmission)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Vehicles with 2.0 L normally aspirated engine:

Item	Bolt	Nm
1	M10x60	45 * See note
2	M12x67	65 * See note
3, 4	M12x75	65 * See note
5	M12x110	65 * See note
6	M12x80	65 * See note
7	M10x50	45 * See note
8 10	M10x45	45 * See note
11	M12x90	65 * See note
A	Alignment sleeves for centering

*Replace bolts.

Fig 3: Identifying Engine/Transmission Mountings (Automatic/Manual Transmission)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Vehicles with 2.0 L TFSI engine:

Item	Bolt	Nm
1	M10x60	45 * See note
2, 3, 4, 6	M12x75	65 * See note
5	M12x100	65 * See note
7	M10x50	45 * See note
8 10	M10x45	45 * See note
11	M12x67	65 * See note
A	Alignment sleeves for centering

*Replace bolts.

Fig 4: Identifying Engine/Transmission Bolt Location

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Vehicles with 3.0 L 6-cyl. gasoline engine:

Item	Bolt	Nm
1, 10, 11	M10x60	45 * See note
2	M10x90	65 * See notes
3	M12x110	65 * See note
4	M12x80	65 * See note
5, 6	M12x90	65 * See note
7	M10x100	45 * See note
8	M12x75	65 * See note
9	M10x70	45 * See note
A	Alignment sleeves for centering

*Replace bolts.

*Bolt strength rating 10.9

Fig 5: Identifying Engine/Transmission Threaded Connections

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Vehicles with 3.2 L FSI 6-cyl. gasoline engine:

Item	Bolt	Nm
1, 7	M10x115	65 * See note
2	M12x130	65
3, 4, 5, 6	M12x110	65
8, 9, 10	M10x80	45
A	Alignment sleeves for centering

*Bolt strength rating 10.9.

Torque specifications

Component		Nm
Bolts/nuts	M6	10
	M8	20
	M10	45
	M12	65
Except for the following:
Mounting base for selector lever cable to gearbox		23
Heat shield for drive axle to transmission		23