Removing and installing securing spring for locking cable
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Audi A4, 2008 Audi S4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- To remove locking cable lift spring slightly at top - arrow B -.
- Disengage spring from retainer lug - arrow C - and lift out.
Installing
- Insert spring from above - arrow B - and engage under retainer lug - arrow C -.
- Align spring so that it lies level in groove - arrow A -.
- To install locking cable, lift spring slightly at the top - arrow B -.