Transmission, attaching assembly stand
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Work procedure
- Torque converter secured with Bracket 30-211 A or removed.
- Attach holding plate VW 309 onto attachment and holding rig 3457.
- Attach and secure Attachment and Holding Rig 3457 at mounts on transmission housing.
NOTE:
- Attachment and Holding Rig 3457 should only be installed by hand in transmission.
- If bolt is installed with pliers, transmission housing can be damaged.
- Insert transmission into Engine and Transmission Holder VAS 6095 using Shop Crane -Load Cap=700-1200 kg VAS 6100.
NOTE:
- Vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.