Tower "I" , disassembling

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lifting Device T10287 And Mounting Device T10282

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove lifting device T10287 from tower "I".

Fig 2: Remove/Install clutch "D/G" From/To Clutch "F"

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove clutch "D/G" - 2 - from clutch "F" - 1 -.

Fig 3: Tower "I", Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove clutch "F" - 5 - from planetary gear "III" - 1 -.

NOTE:

Thrust washer - 2 - , axial needle bearing - 3 - and angle washer - 4 - remain on planetary drive "III".