ATF lines, removing and installing, (vehicles with 6 cyl. engine)

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Place drip tray VAG1306 underneath.

Fig 1: ATF Lines, Removing And Installing Overview (Vehicles With 6 Cyl. Engine)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Bolt (21Nm)

Insert line until impact by hand before tightening

2 - Oil line to cooler

Note marking on transmission housing
Note color identification (arrow)

3 - Oil line from cooler

Note marking on transmission housing
Note color identification (arrow)

4 - O-ring

Apply ATF when inserting
Always replace

5 - O-ring

Apply ATF when inserting
Always replace

6 - Bolt (5Nm)

Insert line until impact by hand before tightening

7 - O-ring

Apply ATF when inserting
Always replace

8 - Union nut - 29 Nm

9 - Bracket

10 - Bolt (5Nm)

11 - Double bolt - 10 Nm

12 - Bracket

13 - Combination nut - 10 Nm

14 - Clamp

15 - Combination nut - 5 Nm