Tiptronic Switch F189 , removing and installing: Removing

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove shift mechanism cover → Shift mechanism cover, removing and installing .

Fig 1: Pressing Lugs Inward And Removing Cover From Guide

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press the 4 lugs (arrows) inward and remove cover - 2 - from guide - 1 -.
Remove circuit board with integrated Tiptronic Switch F189 from cover - 2 -.

NOTE:

If necessary, masking panel with solenoid for Tiptronic Switch F189 can be removed as described below. As replacement part the masking panel is only available together with guide.

Fig 2: Separating Both Guide Parts By Applying Careful Levering Movements

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Separate both guide parts by applying careful levering movements (arrows).
Remove masking panel with solenoid for Tiptronic Switch F189.