Preliminary work

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The following described procedure saves the work of removing center console.

Fig 1: Identifying Cutting Area Of Adjusting Gauge 3352A

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Cut through adjusting gauge 3352A at rear end of flat area - arrow - using a parting grinder.

CAUTION: Wear protective glasses.

Order a new adjusting gauge 3352A for locking cable as replacement for later use.