Torque converter oil seal, replacing: Installing

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Insert contact ring.
Coat outer circumference and sealing lips of sealing ring with ATF.

Installation position: The open side of the sealing ring faces the transmission.

Fig 1: Driving In Torque Converter Oil Seal Until Stop Of Thrust Piece 3295

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Using thrust piece 3295 , drive in sealing ring for torque converter up to thrust piece stop.