Drive pinion, disassembling and assembling: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Drive Pinion, Disassembling And Assembling (1 Of 2)

GW00019292

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Thrust plate VW 401
Thrust plate VW 402
Punch VW 407
Punch VW 412

Tube VW 415 A
Support channels VW 457

Fig 2: Identifying Special Tools - Drive Pinion, Disassembling And Assembling (2 Of 2)

GW00019293

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Slide Hammer-Complete Set VW 771
Driving sleeve 32 - 109
Seal driver-frt wheel bearing 40 - 21
Driver 3013

Tube for wheel bearing 3345
Attachment V.A.G 1582/7

Special tools, testers and auxiliary items required

Fig 3: Sleeve T40103

GW00019294

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Sleeve T40103

Fig 4: Kukko 21/2 Internal puller, Kukko 21/4 Internal puller, Kukko 22/2 Counter support

GW00001457

Courtesy of VOLKSWAGEN UNITED STATES, INC.

- 1 - Internal extractor Kukko 21/2