Installation position of circlips
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Circlips - 1 - and - 2 - secure input shaft ball bearing.
Determining thickness → Circlips for input shaft ball bearing, determining .
- Circlip - 3 - secures needle bearing for 3rd speed selector gear and 3rd and 4th gear synchronizing hub.
Thickness: 2.00 mm.
- Circlip - 4 - secures 3rd and 4th gear synchronizing hub.
Determining thickness Determining thickness of circlip for synchronizing hub for 3rd and 4th gear .