Assembly overview
WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Sequence for disassembling and assembling → Disassembling and assembling sequence
I - Removing and installing ball bearing for input shaft, transmission cover, bearing housing and selector shaft → Ball bearing for input shaft, transmission cover, bearing housing and selector shaft, removing and installing
- Removing and installing 3rd to 6th gear → 3rd to 6th gear, removing and installing
- Removing and installing input shaft, pinion shaft/hollow shaft, reverse gear wheel and reverse selector gear → Input shaft, pinion shaft/hollow shaft, reverse gear wheel and reverse selector gear, removing and installing
II - Removing and installing Torsen housing and Torsen differential with transmission removed → Torsen housing and Torsen differential, removing and installing
- Removing and installing Torsen housing with transmission installed → Torsen housing, removing and installing (with transmission installed)
- Disassembling and assembling Torsen housing → Torsen housing, disassembling and assembling