General repair instructions: Components: Transmission

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Select correct bolts and other components according to transmission code letters → Code letters, allocation, transmission ratios, capacities .
When installing a new transmission, check oil level and fill up with oil if necessary → Transmission oil level, checking .
Capacities and specifications → Code letters, allocation, transmission ratios, capacities
When installing a new rear final drive unit, check oil level in rear final drive and top off if necessary → 39 FINAL DRIVE, DIFFERENTIAL .

Thoroughly clean all joints and surrounding areas before Disassembling.
When installing transmission make sure dowel sleeves are correctly seated.