Determining mean torsional side clearance
WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Add up 4 measured values and divide total by 4.
| Example: | ||
| 1st measured value | 0.28 mm | |
| + | 2nd measured value | 0.30 mm |
| + | 3rd measured value | 0.30 mm |
| + | 4th measured value | 0.28 mm |
| = | Sum total of measured values | 1.16 mm |
- Result: The mean torsional side clearance equals 1.16 mm : 4 = 0.29 mm
NOTE:
If during measurement the individual values differ from one another by more than 0.06 mm, the ring gear or drive unit itself have not been correctly installed. Check repair work and replace drive unit if necessary.