Installing bevel gears

WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Small Differential Bevel Gears

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Lubricate one-piece thrust washer with gear oil and insert.
Insert large bevel gears.
Insert small bevel gears offset by 180 ° and swivel into place (arrow).
Drive bevel gear shaft into final position and secure.