Locking bolt for needle bearing

WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Location Of Securing Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove locking bolt (arrow).

NOTE: Bolt is not always installed.

Fig 1: Location Of Securing Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

If installed, screw in locking bolt and tighten to 25 Nm.