Installation position of circlips
WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Circlips -1- and -2- secure ball bearing of input shaft.
Determining thickness. Refer to Input shaft, adjusting .
- Circlip -3- secures synchro-hub for 3rd and 4th gear.
Thickness 2.00 mm. Identifiable by: Color brown.
- Circlip -4- secures synchro-hub for 3rd and 4th gear.
Determining thickness. Refer to Available circlips for 3rd and 4th gear synchro-hub . Identifiable by: Color blue.
- Circlip -5- secures 5th gear wheel.
Determining thickness. Refer to Available circlips for 5th gear wheel .