Replacing tailpipe
WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, and 2003 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Cut through tailpipe - 1 - squarely at cutting point - C - using body saw, e.g. VAG1523A.
- Push tailpipe - 3 - on up to marking - A -. When doing so, make sure that slot in tailpipe is in line with marking - B -.
- Tighten bolted connection on clamp - 2 - to 25 Nm.