Work sequence

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, and 2003 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Perform measurement with valve lifters removed and with bearing cap at chain sprocket end and double bearing cap at camshaft sprocket end installed.

Attach dial indicator with universal dial indicator holder VW387 to cylinder head:

Fig 1: Camshaft Axial Clearance, Checking - Intake Camshaft

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Intake camshaft

Fig 2: Camshaft Axial Clearance, Checking - Exhaust Camshaft

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Exhaust camshaft

Wear limit for intake and exhaust camshafts:

Axial clearance: max. 0.20 mm