LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (1.8L - Turbo Engine Mechanical, Engine Code(S): AMB) >> 13 - Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Ribbed belt, removing and installing >> Removing

Ribbed belt, removing and installing: Removing

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, and 2003 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Mark direction of the ribbed belt with chalk or felt-tip pen prior to removal. Running a used belt in the opposite direction could destroy it. When installing the belt, make sure it is properly seated in the pulleys.
Fig 1: Swiveling Tensioning Element In
GW00017321Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Locking Tensioner Using Mandrel T10060
GW00017322Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals