Special Tools
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Spanner Wrench 3212
- Multipoint Socket T10035
- Counterhold Tool Touareg V10 T10172 with Adapter T10172/2
- Socket T40058
- Locking Pin T40069
- Locking Pin T40071, quantity: 2
Special tools and workshop equipment required
- Spark Plug Removal Tool 3122 B
- Valve Seal Removal Tool 3364
- Valve Stem Seal Driver 3365
- Valve Cotter Disassembly/Assembly Device VAS 5161 with Guide Plate for FSI Engine VAS 5161/19B
- Adapter T40012
Special tools and workshop equipment required
- Valve Seal Removal Tool 3364
- Valve Stem Seal Driver 3365
- Valve Cotter Disassembly/Assembly Device VAS 5161 A with Guide Plate for FSI Engine VAS 5161/19B
- Engine and Transmission Holder VAS 6095
- Cylinder Head Tensioning Device VAS 6419
Special tools and workshop equipment required
- Impact Puller T10133/3 from the Tool Set T10133
- Key T40049
- Socket T40058
- Locating Pins T40116
- Camshaft Clamp T40133, quantity: 2
- Compression Tester V.A.G 1763
- Oil Collecting and Extracting Device V.A.G 1782
- Dial Gauge 0-10 mm VAS 6079
- Dial Gauge 0-3 mm VAS 6080
- Dial Gauge Holder VW 387
- Not illustrated:
- Locking Pin T40069
- Locking Pin T40071
- Pressure Fork VAS 5161/2
- Drift VAS 5161/3
- Installation Fork VAS 5161/5
- Engaging Device VAS 5161/6
- Installation Cartridge VAS 5161/8
- Knurled Screws VAS 5161/12
- Insertion Device VAS 5161/18
- Straight Edge 500 mm VAS 6075