LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (3.0L - Cylinder Head, VALVETRAIN - Engine Code(S): CCBA (Cabriolet)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Left Cylinder Head Cover >> Installing

Left Cylinder Head Cover: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the cylinder head seal if it is damaged.

Replace the cylinder head cover bolts when replacing the damaged seal.

Replace the O-ring.

-- Clean any oil or grease off the sealing surfaces.

-- Tighten the left cylinder head cover bolts. Refer to Figure.

-- Install ignition coils. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals